Auto Hoist Power Units 1
Auto Hoist Power Units 1
General Description
This power unit is designed exclusively for Auto hoist,with power up, gravity down function.Such products can be applied to different voltages and frequences and the lowering movement is controlled by the manual release valve. The power unit also applies to different kinds of hydraulic fork lift and scissors lift.
Hydraulic Circuit Diagram
Outline Dimension
Model Specifications
Special notes
The AC motor is of S3 duty cycle, which can only work intermittently and repeatedly, ie., 1minute on and 9 minutes off.
Clean all the hydraulic parts concerned before mounting the power unit.
Viscosity of the oil shoud be 15~68 cst,and the oil should be clean and free of impurities,N46 hydraulic oil is recommended .
The power unit should be mounted vertically.
Check the oil level in the tank after the initial running of the power unit.
Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
Special notes
The AC motor is of S3 duty cycle, which can only work intermittently and repeatedly, ie., 1minute on and 9 minutes off.
Clean all the hydraulic parts concerned before mounting the power unit.
Viscosity of the oil shoud be 15~68 cst,and the oil should be clean and free of impurities,N46 hydraulic oil is recommended .
The power unit should be mounted vertically.
Check the oil level in the tank after the initial running of the power unit.
Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.